Total # Of Inputs 16
Mic/Line Inputs 3-pin XLR Balanced Microphone x10
1/4" Phone Balanced Line x10
Stereo Line Inputs ST1 - ST3 1/4" Phone L/R Stereo
In-Line Inputs/Returns No
AUX Sends 1/4" TRS Phone x3 4 Total sends, 1 reserved for internal effects
AUX Returns Dedicated USB Return, Aux 1-2, Aux 3-4, L/R Pre
Inserts 1/4 TRS Phone x12 (Mono chs and Main Stereo Out)
BUS (Group) Outputs No
2 Trk Master I/O Main Output: Balanced 3-pin XLR
ALT I/O USB Connector
1/4" Phone Mono Out
Monitor Outputs RCA Stereo Phono - ALT Out
RCA Stereo Phono - REC Out
EQ Section 3-Band with Mid Sweep On all Mono Channels
2-Band On Stereo Channels
Solo/Mute Mute and PFL Solo
Channel Level Control 100mm Fader
Trim/Gain Control Rotary Control
Phantom Power +48V Switched Globally
Metering 12 Segment Peak LEDs
Frequency Response Mic in to Mix L/R Out, 30dB gain: +0.5/-1dB 20Hz to 20kHz
Line in to Mix L/R out 0dB gain: +0.5/-1dB 10Hz to 30kHz
Stereo in to Mix L/R out: +0.5/-1dB 10Hz to 30kHz
Headroom Analogue Headroom from nominal (0Vu): 21dB
USB in & out headroom from nominal (0Vu): 14dB
Signal-to-Noise Ratio Mic Pre EIN @ max gain 150R input Z 22-22kHz: -127dBu
Mix L/R out, L/R faders = 0, 22-22kHz: -86dBu
Total Harmonic Distortion (THD) Mic in to Mix L/R Out, 0dB gain 1kHz +10dBu out: 0. 004%
Mic in to Mix L/R Out, 30dB gain 1kHz: 0. 014%
Line in to Mix L/R out 0dB gain 0dBu 1kHz: 0. 005%
Stereo in to Mix L/R out 0dB gain +10dBu 1kHz: 0. 003%
USB USB Audio In/Out: USB 1.1 compliant 16-bit
Sample Rate: 32, 44.1, or 48kHz
Dimensions (WxHxD) 18.3 x 3.85 x 18.3" (464 x 98 x 465mm)
Weight 18.7 lb (8.5 kg)